Time of use changes

[titia137]

Description

Hello,
I have a Deye 12kW inverter (model SG04LP3) and use Node-RED for automation.
I'm trying to configure the entire "Time of Use" table. After making the changes, everything looks fine (all the changes I made appear correctly in the Home Assistant entities). (I use time.set_value). However, after a few minutes, the values for "Deye Program 5 Time" and "Deye Program 6 Time" revert to their previous settings. The values for "Deye Program 1-4 Time" and "charging" and "SOC" remain good.

Reproduction Steps

Program times 5 and 6 revert to their previous values on their own.

Log

ha.log

Version

24.12.10_2

Home Assistant Core Version

2025.1.2

Home Assistant Operating System Version

13.2

[davidrapan]

Hi @titia137, I have the same device and time entities controlling TOU working just fine for me. In addition it would also make no sense that only some work and other don't.

Make sure you are trying to set correct values:

• Program 4 Time < Program 5 Time
• Program 5 Time < Program 6 Time
• Program 6 Time < Program 1 Time (next day)

[titia137]

Deye Program 6 Time změněno na 21:00 - this is by itself
20:40:29 - Před 1 minutou
Deye Program 5 Time změněno na 20:05 - this is by itself
20:40:29 - Před 1 minutou
Deye Date & Time změněno na 15. ledna 2025 v 20:40
20:40:29 - Před 1 minutou
Deye Date & Time změněno na 15. ledna 2025 v 20:39
20:39:27 - Před 2 minutami
Deye Date & Time změněno na 15. ledna 2025 v 20:38
20:38:24 - Před 3 minutami
Deye Program 6 Time změněno na 23:55 spuštěno akcí Čas: Nastavit čas - this is by Node-red
20:38:09 - Před 3 minutami - Supervisor
Deye Program 5 Time změněno na 23:50 spuštěno akcí Čas: Nastavit čas - this is by Node-red
20:38:09 - Před 3 minutami - Supervisor
Deye Program 4 Time změněno na 20:00 spuštěno akcí Čas: Nastavit čas - this is by Node-red
20:37:41 - Před 4 minutami - Supervisor
Deye Program 3 Time změněno na 16:00 spuštěno akcí Čas: Nastavit čas - this is by Node-red
20:37:41 - Před 4 minutami - Supervisor

[davidrapan]

This just means that it was changed in the inverter, not that it was changed by itself (or by integration). 😉 Make sure that nothing else configures your inverter (e.g. Solarman App).